Guru Metachem Private Limited ( A Unit Of Guru Corporation)

We Are Manufacturer Of This Flux:

• Casting Powder forms a good lubricating film on the surface of mould not allowing solidifying metal adhesion to the mould.
• Casting Powder provides easy and fast solidification of metal by providing high rate heat removal from metal.
• Casting Powder gives very good performance at elevated temperatures with the aid of its well selected additives.
• Casting Powder increases the quality of metal surface.
• Casting Powder is cheaper than Rapeseed/Casting Oil.

Specification :

• CaO% : 30 – 35
• SiO2 % : 33 – 40
• Al2O3 % : 8 – 10
• Na2O/K2O % : 4 – 6
• C free% : 5 – 7

How It Works Casting Powder contains low melting constituents that instantly generate liquid slag, which penetrates into the gap between the mould and the solidifying shell of the billet. Casting Powder is added in small amounts and continuously over the casting duration. The melting of the Casting Powder occurs slowly in layers. Hence, the top surface of the liquid metal in the billet / slab / bloom always remains protected from the atmosphere.

 

Uses : Traditionally Casting Powder is used for bloom and slab casting. Now, it is used for billet (open) casting also as an alternative to mould oil for some plants.

We Are Manufacturer Of This Flux:

• Casting Powder forms a good lubricating film on the surface of mould not allowing solidifying metal adhesion to the mould.
• Casting Powder provides easy and fast solidification of metal by providing high rate heat removal from metal.
• Casting Powder gives very good performance at elevated temperatures with the aid of its well selected additives.
• Casting Powder increases the quality of metal surface.
• Casting Powder is cheaper than Rapeseed/Casting Oil.

Specification :

• CaO% : 30 – 35
• SiO2 % : 33 – 40
• Al2O3 % : 8 – 10
• Na2O/K2O % : 4 – 6
• C free% : 5 – 7

How It Works Casting Powder contains low melting constituents that instantly generate liquid slag, which penetrates into the gap between the mould and the solidifying shell of the billet. Casting Powder is added in small amounts and continuously over the casting duration. The melting of the Casting Powder occurs slowly in layers. Hence, the top surface of the liquid metal in the billet / slab / bloom always remains protected from the atmosphere.

 

Uses : Traditionally Casting Powder is used for bloom and slab casting. Now, it is used for billet (open) casting also as an alternative to mould oil for some plants.

Meet Marcolex1 Casting Powder – it's not your average stuff. Picture this: it dries in just 30 minutes, stays rock-solid without breaking, and sports a sleek white finish that's pure class.
Why Marcolex1?✨ Guaranteed 30-Minute Dry Time�� Tough and Durable Finish⚪ Elegant White Color�� Top-notch Quality, No Cheap Imitations Here
Whether you're a pro or just starting out, Marcolex1 is your go-to for flawless casts that stand the test of time.
Ready to take your creations to the next level? Drop us a line and let's get started!

We Are Manufacturer Of This Flux:

• Casting Powder forms a good lubricating film on the surface of mould not allowing solidifying metal adhesion to the mould.
• Casting Powder provides easy and fast solidification of metal by providing high rate heat removal from metal.
• Casting Powder gives very good performance at elevated temperatures with the aid of its well selected additives.
• Casting Powder increases the quality of metal surface.
• Casting Powder is cheaper than Rapeseed/Casting Oil.

Specification :

• CaO% : 30 – 35
• SiO2 % : 33 – 40
• Al2O3 % : 8 – 10
• Na2O/K2O % : 4 – 6
• C free% : 5 – 7

How It Works Casting Powder contains low melting constituents that instantly generate liquid slag, which penetrates into the gap between the mould and the solidifying shell of the billet. Casting Powder is added in small amounts and continuously over the casting duration. The melting of the Casting Powder occurs slowly in layers. Hence, the top surface of the liquid metal in the billet / slab / bloom always remains protected from the atmosphere.

We Are Manufacturer Of This Flux:

• Casting Powder forms a good lubricating film on the surface of mould not allowing solidifying metal adhesion to the mould.
• Casting Powder provides easy and fast solidification of metal by providing high rate heat removal from metal.
• Casting Powder gives very good performance at elevated temperatures with the aid of its well selected additives.
• Casting Powder increases the quality of metal surface.
• Casting Powder is cheaper than Rapeseed/Casting Oil.

Specification :

• CaO% : 30 - 35
• SiO2 % : 33-40
• Al2O3 % : 8 -10
• Na2O/K2O % : 4 - 6
• C free% : 5 - 7

How It Works Casting Powder contains low melting constituents that instantly generate liquid slag, which penetrates into the gap between the mould and the solidifying shell of the billet. Casting Powder is added in small amounts and continuously over the casting duration. The melting of the Casting Powder occurs slowly in layers. Hence, the top surface of the liquid metal in the billet / slab / bloom always remains protected from the atmosphere.

 

Uses : Traditionally Casting Powder is used for bloom and slab casting. Now, it is used for billet (open) casting also as an alternative to mould oil for some plants.

GURU is a large Global supplier of Refractory Castables. We have a high-performance product range of high-quality, specification based castables. Our manufacturers are the worlds best compaies providing great innovative products. We have been assocoated with our vendors since the past five decades. We also have a complete team of engineers, site supervisors & applicators for complete turnkey projects worldwide.

EXPORTS: A substantial percntage of our Refractory sales have been of exports. We are currently suppling a large range of Refarctory Castables to Africa, Middle East, Iran, Bangladesh, & Nepal. We do complete pallating, fumigation, documentation, etc. for export sales, so are oversees customers can have a tension-free buying experience and have access to high-quality products.

Please contact us anytime for your refractory requirements, We provide complete design, engineering, turnkey, application & supervision services. Our experiences refractory engineers can help you find the appropriate product and help you achive a higher life and better performace for your furnaces, boilers, laddles & various heat equipments.

GURU range of CC mould fluxes/powder provide benefits with lubrication to copper moulds, prevent secondary oxidation, provide top insulation, and promote absorption of non-metallic inclusions. Products suitable for open casting of billets have been developed which provide benefits with improved rhomboidity of billets and higher mould life.